| |
Ipv6 Cisco Training: Disabling Http Access To An Ipv6 Router
By Charles E Ross
Now just in case if you didn’t know, by default once you assign an IPv6 address to a Cisco router’s interface; that router is then automatically capable of being reached by using the Hyper Text Transfer Protocol or HTTP.
So, if you don’t want a particular Cisco IPv6 router to have the capability of being reached via HTTP, you’ll have to disable http access to the router; by performing the following steps on the router:
Steps:
Router>enable
Router#configure terminal
Router(config)#no ip http server
Router(config)#exit
Router#copy run start
Steps explained:
Step #1
1. Router>enable
Puts router into Privileged
To Find other gateway wireless router
Services
 
EXEC mode.
Step #2
2. Router#configure terminal
Puts router into Global configuration mode.
Step #3
3. Router(config)#no ip http server
Disables HTTP access to the router.
Step #4
4. Router(config)#exit
Causes router to exit global configuration mode and re-enters into Privileged EXEC mode.
Step #5
5. Router#copy run start
Saves the contents of the running-config to local Non -Volatile Random Access memory (NVRAM).
I invite you to visit my website were you’ll find the latest information regarding Cisco IPv6 Design and Implementation Techniques.
To your success,
Charles Ross, CCNP #CSCO10444244 is the owner of Ittechtips.com; where you'll find free comprehensive information and videos about IPv6 technology and how it works with Cisco Systems technology.
Sign-Up for "18 Free Videos" that will teach you IPv6 Address Representation In Under 10 Minutes! And, also learn more about the new "Cisco IPv6 Video Accelerated Training Course" at his website. www.ciscoipv6ittechtips.com
|
|
